
Code-Evaluated · IAPMO ER-454Structural
Code-Evaluated Structural Wood Screws for Decks, Framing and Beams
U2 structural screws join wood to wood in decks, framing, beams and ledgers without pre-drilling in many applications. The Universal Screw and Construction Screw are structural and ACQ-treated lumber compliant under IAPMO evaluation report ER-454.
What is a structural screw? A structural screw is a heavy-duty wood screw engineered and tested to carry structural loads. Builders use structural screws in place of lag screws and bolts for connections like deck ledgers, beams and framing, and evaluation reports such as IAPMO ER-454 confirm the load values builders and inspectors rely on.
Structural Wood Screws for Every Framing Job

ER-454 · STRUCTURAL & ACQ
UNIVERSAL SCREW™
Countersunk head that sits flush. For decks, framing, subfloors, stairs and railings.
#6 to #12 · 1/2" to 12" · carbon steel or 316 stainless

ER-454 · STRUCTURAL & ACQ
CONSTRUCTION SCREW™
Dome head with a large bearing surface. A lag screw alternative for ledgers, joists and multi-ply LVL, LSL and PSL beams.
#10, 5/16" and 3/8" diameters, 2-1/2" to 7" long. Gold-coated carbon steel or stainless steel.

DRJ TER 2606-111 · STRUCTURAL
TRUSS SCREW™
Trim-style head with a T30 drive. For angled truss and framing connections.
1/4" diameter · 4-1/2" and 6"
Structural Screw Guide: Decks, Ledgers, Beams and Trusses
| DECKS | Deck boards, deck framing and stairs → Universal Screw |
| LEDGERS | Deck ledger to rim board, joists and posts → Construction Screw |
| BEAMS | Multi-ply LVL, LSL and PSL beams → Construction Screw |
| TRUSSES | Trusses to top plates, angled framing → Truss Screw |
| COASTAL | Wet or coastal areas → Universal or Construction Screw in 316 stainless |
Structural Screw FAQ
Universal and Construction Screws are evaluated in IAPMO report ER-454, and the Truss Screw in DrJ TER 2606-111. Check your local authority for acceptance.
Structural screws drive without pre-drilling in many applications and install faster than lag bolts. The U2 Construction Screw is designed as a lag screw alternative; size and spacing follow ER-454 and the project design.
Use the Construction Screw for ledger-to-rim connections. Check ER-454 and the load tables for size and spacing.
The Tapper Point is designed to start fast and reduce splitting, so pre-drilling is not needed in many applications.
Use gold coating for ACQ, black coating for MCQ (Universal), or 316 stainless.
Use the retailer locator to find a dealer near you.

Builders & Dealers
Find U2
Structural Screws
Buy from a retailer near you, or stock the full structural line as a U2 dealer.
